 | Rig Review - New Icom UHF CB
Radio Rampage gets a hands-on look at the upcoming new Icom UHF CB, the IC-440 |
 | Icom IC-400 Schematics
The schematic diagrams of the Icom IC-400PRO. |
 | Deviation Meter
Build a deviation meter for your radio. Indicates the audio deviation of any signal you receive.
(NOT YET FINISHED) |
 | GME TX-4400 Schematics
The schematic diagrams of the GME TX-4400. |
 | GME TX-4200 Schematic
The schematic diagram of the GME TX-4200. |
 | Home Made Desk Microphone
Build an amplified desk microphone (power mic). Dead easy and cheap as chips. |
 | Field Strength Meters
Two field strength meters to build. |
 | Dipole Antenna
Build a simple dipole antenna. A good omni-directional antenna, and a great reference antenna for antenna builders. |
 | 100 Watt UHF Amplifier
A project for the advanced constructor. A 100 Watt UHF linear amplifier. Deceptively simple, and CHEAP!
100 Watts out for 5 Watts in. |
 | Icom IC-41S Extended Range
Instructions on how to extend the TX range of your Icom IC-41S handheld. Standard IC-41S operates from 450 MHz to 480 Mhz, this project extends the upper limit to 520 MHz. |
 | Icom IC-40S Extended Range
Instructions on how to extend the RX / TX range of your Icom IC-40S handheld. Standard IC-40S operates from 450 MHz to 480 Mhz, this project extends the upper limit to as much as 500 MHz. |
 | Yagis
A guide to yagis. This is not complete, I am constantly working on this as I do the research. |
 | Computer PSU
Build a regulated 13.8 volt 8 Amp power supply from an old computer power supply. |
 | De-Scrambler
Build a simple speech-inversion type descrambler. |
 | Uniden UH-011 Schematics
The schematic diagrams of the Uniden UH-011 |
 | Icom IC400 Signal Strength Meter
Add a signal strength meter to your Icom IC-400PRO. |
